Fuel injector cleaning is an all to often neglected but very necessary part of engine maintenance. Not taking care of your fuel injectors can cause them to become restricted and clogged; especially with the high in Ethanol content of today’s fuels.

Fuel injector cleaning a before and after

More important is that we do the same for the inside of the fuel injector.

Although fuel injectors have the finest tolerances of any working part in the modern internal combustion engine, it is the most neglected component. Regular fuel injector cleaning as a maintenance item is hardly ever considered or advised.

Hydrocarbons, additives and Ethanol, which draws moisture, all forms part of today’s fuels. Add to that engine gunk and you have the cause for fuel injectors to become restricted and clogged. All fuel injected gasoline based engines are vulnerable to fuel injectors clogging. The ones that are most vulnerable and most likely to experience drive-ability and emissions problems are the older ones as well as the direct injected engines or vehicles and equipment that sat for long periods of time with old gas in the tank. Ultrasonic fuel injector cleaning is the most reliable method for cleaning fuel injectors that setup with old fuel in them.

Almost all of today’s computer controlled engines monitor one or two oxygen sensors, placed in such a way that it can only analyze the combined exhaust gases and not each cylinder, thus averaging the air fuel ratios. This can cause some cylinders to run leaner and other cylinders to run richer, causing all kinds of drive-ability issues and in some case even catastrophic engine failure. Dirty, leaking  or a clogged fuel injector can and will cause eventual catastrophic engine failure. Fuel injector cleaning can prevent this from happening.

allow us to earn your business. please click here for shipping instructions or call us today 1.800.381.2065!

 We can help clean your fuel injectors and save you money, too! We service fuel injectors for people nationwide!

 Fuel Injector Cleaner!

Fuel Injector Cleaner can only clean what it touchesInjector cleaning additives  can only clean what it touches! Liquid in its natural state or under pressure will always follow the easiest path. It therefore becomes clear why some fuel injector cleaning methods such as fuel injector cleaners in the form of  fuel tank additives or fuel rail induced injector cleaners does not always do a good job of cleaning the internal components of the fuel injectors.

Fuel injector cleaner in the form of chemicals cannot distinguish between the various components it touches and therefore will have a cleaning effect on everything it comes in contact with. In theory this is supposed to be good but in practice this more often than not has the opposite effect. Grime and dirt loosened by the fuel injector cleaner from the various fuel system components such as the fuel tank, fuel lines and fuel rail are sent directly to the fuel injectors. Since the filter baskets inside the fuel injectors are only between 3 and 10 microns in size they become clogged very quickly. In some cases fuel rail induced injector cleaner will damage the filter baskets and allow for larger pieces of debris to enter the fuel injector. This can cause the pintle to become stuck or if the debris lodges itself on the pintle, ball or disc seat the injector will start to leak. Leaking fuel injectors is not only a fire hazard but can also cause engine damage.

Some of the products might even be harmful to expensive components such as catalytic converters, oxygen sensors and other components.

Other than it “feels” if the engine runs better there is just no way to verify or confirm that the money spent on fuel injector cleaners was worth it because visual inspection of fuel injector spray patterns and flow rates are not possible.

Need fuel injector cleaning, We do it the right way guaranteed! We will return your injectors within 24 hrs after we received them.

click here for shipping instructions and get started today!

Or call us today at 1.800.381.2065 for more information. We can help clean your fuel injectors and save you money, too! We service fuel injectors for people nationwide!

Fuel injector Cleaning “Outside the engine”

Cleaning fuel injectors by removing them from the engine and then proceed with a process of visual inspection, ultrasonic cleaning and actual flow testing for spray patterns and volume is the only accurate, reliable and guaranteed way to confirm  a clean fuel injector and that your fuel injectors are doing their job the way they are supposed to0. Anything ells is only guess work.

What you see when  cleaning injectors on the engine ABSOLUTELY NOTHING!

What you see when fuel injector cleaning is done inside the engine

  • Atomization cannot be determined.
  • Spray pattern and distribution cannot be determined.
  • Damaged pintle caps, bad, cracked or torn O-rings.
  • It cannot determined leaking pintle, disc or ball valves.
  • It cannot check  fuel delivery per pulsed cycle set.
  • Cannot confirm equal fuel delivery for the injector set is .
What you can see when fuel injector cleaning and flow testing is done outside of the engine:

Bad fuel injector spray pattern

Fuel Injector Spray Pattern (Distribution) and Atomization:

Fuel Injector distribution and atomization

Fuel injector cleaning and testing equipment.

Fuel Injector testing machineManufacturer approved state of the art equipment allows us to visually check injectors for leaks, distribution, faulty injector spray patterns and confirm fuel injector flow rates. To further strengthen our proven testing and diagnostic procedures, and to confirm proper fuel injector functionality at all levels of operation, we check the injectors electronically for current draw and pulse them from 250 to at least 10 000 rpm and sometimes as high as 20 000 rpm before final flow testing. Our fuel injector cleaning equipment also allows us to compare, side by side, fuel injector flow rates and spray patterns.

We service automotive, motorcycle, ATV, snowmobile, jet ski,  marine, and outboard fuel injectors. We also service GDI or direct injection injectors (Gasoline Direct Injectors). Our cost effective ultrasonic cleaning and electronic flow testing procedures will restore most fuel injectors to a reliable factory new condition, therefore eliminating the purchase of new and expensive OEM or aftermarket fuel injectors.

When all cylinders are operating evenly, you can expect emissions, drive-ability, peak performance and fuel economy to improve.

Spray pattern before ultrasonic fuel injector cleaning.

dirty fuel injector Flow testing injectors

Spray pattern and volume  after injector cleaning.

A cleaned injector after going through our fuel Injector Cleaning process After ultrasonic cleaning

 

For walk in customers we offer “Same Day” or “While You Wait” fuel injector cleaning service at $25.00 per injector and $35.00 per GDI Injector.

Shipping Instructions:

For fast, friendly and reliable fuel injector cleaning service, lets us help you clean your injectors the right and only guaranteed way.

click here and get started today!

Or call us today at 1.800.381.2065 for more information. We can help clean your fuel injectors and save you money, too! We service fuel injectors for people nationwide!

 

We Do Not Service:

  • Diesel Injectors
  • GM Vortec CPI injector “spider” assemblies.
  • Ficht Fuel Injectors